HVAC maintenance is one of the easiest ways to avoid unexpected breakdowns, improve energy efficiency, and extend the life of your heating and cooling system.
Our maintenance program is built around the rhythm of the South Carolina climate: a spring tune-up for your air conditioner and a fall inspection of your heating system, with each visit including a complete top-to-bottom inspection.
Most HVAC “tune-ups” stop at a filter change and a quick rinse of the outdoor unit. Ours don’t. Every maintenance visit includes a comprehensive 20+ point inspection designed to improve efficiency, reduce unnecessary wear, and identify developing problems before they turn into costly repairs.
We test capacitors and contactors under load (not just visually) measure refrigerant pressures against manufacturer specifications, flush condensate drains before they clog, and perform combustion analysis on the heating side. You’ll receive a written checklist of everything we inspected, what we found, and what to watch, along with photos of anything that needs attention.
These are the components that account for the majority of after-hours emergency calls — and most are detectable weeks or months before they fail.
A weak capacitor may continue working for months — until the first really hot day, when the added demand causes it to fail. We test capacitors under load during every maintenance visit to catch weakening components before they leave you without cooling.
Small refrigerant leaks often reduce efficiency long before they affect comfort. We measure refrigerant pressures against manufacturer specifications during every visit because long-term trends can reveal problems before cooling performance drops.
A dirty evaporator coil can reduce efficiency by up to 30% while placing additional strain on the compressor. We clean and inspect it during every spring maintenance visit.
Your contactor cycles every time your air conditioner starts. Over time, the electrical contacts wear, pit, and eventually fail — often during peak summer demand. We inspect contact condition during every maintenance visit.
Clogs cause water damage and frozen coils. We flush the drain on every spring visit — before the clogs, not after.
Restricted airflow forces your HVAC system to work harder than necessary, increasing wear and reducing efficiency. During maintenance, we inspect filter condition, return airflow, and other airflow restrictions that could affect system performance.
Most of these show up weeks before they fail. Two visits a year catches them. Let’s get your system on the schedule.
Same thorough process every time, spring and fall.
We schedule spring and fall together at sign-up so you never have to remember to call. Both visits go on the calendar.
Confirmation text 24 hours out, and a “tech is on the way” text the morning of. No all-day wait.
Electrical, mechanical, refrigerant, airflow, and safety — measured and documented, not just glanced at.
Checklist results plus photos of anything that needs attention. No high-pressure pitch — you decide what gets fixed.
Plan renews quietly each year. No action required unless you want to cancel.
Fewer surprises. Better performance. Documented service history.
Documented measurements — not just a visual inspection.
Frequently Asked
Twice a year is the manufacturer-recommended cadence: once in spring before AC season, once in fall before heating season. Skipping years won’t break your system tomorrow — but it shortens equipment lifespan, increases the likelihood of mid-summer failures, and voids most extended parts warranties.
Every visit covers 20+ inspection points across electrical, mechanical, refrigerant, airflow, and safety systems. We measure refrigerant pressures, clean coils, test capacitors and contactors under load, flush the condensate drain, calibrate the thermostat, and verify safety controls. You get a written checklist of what we found.
Yes. Our technicians service and maintain all major HVAC brands, including central air conditioners, heat pumps, furnaces, and ductless mini-split systems. Maintenance procedures are tailored to the manufacturer’s recommendations for your equipment.
Yes. Regular HVAC maintenance helps your system operate more efficiently, which can reduce energy use and lower monthly utility bills. It also helps identify worn components before they fail, allowing for smaller repairs that may prevent more expensive breakdowns or premature system replacement.
Most maintenance appointments take about 60 to 90 minutes, depending on your system and its condition. During the visit, your technician performs a complete inspection, tests system performance, cleans key components, and documents any findings before reviewing everything with you.
You’ll see photos and our recommendation in writing — but nothing gets fixed without your sign-off. We’ll tell you what needs attention now vs. what to watch, with honest context on urgency.
A tune-up is a single maintenance visit. A maintenance plan includes scheduled spring and fall tune-ups each year, priority scheduling for repair calls, documented service records, and additional membership benefits designed to help keep your system running efficiently year-round.
Yes, in many cases. Tempstar, Carrier, Trane, Lennox, Mitsubishi, and most other manufacturers require annual professional maintenance to keep 10-year parts warranties valid. We document every visit so the records are available if a warranty claim comes up.
We do a first-visit condition assessment before enrolling any system. If there are underlying issues that need to be addressed, we’ll lay them out honestly. Some older systems benefit significantly from maintenance; others are better candidates for replacement. We’ll tell you which yours is.
Spring and fall preventive maintenance visits, priority scheduling for any repair calls, filter-change reminders, and documentation of every visit for warranty purposes. Plan renews automatically each year — no need to remember to call.
HVAC investments shouldn't put your comfort on hold. We work with qualifying customers to spread the cost of repairs, replacements, and indoor air quality upgrades into manageable monthly payments.
Subject to credit approval. Financing options, terms, and qualifications may vary by lender and project type. Not all applicants will qualify. Our team can walk you through available options when you request service or an estimate.
20+ inspection points, written findings, priority scheduling for repair calls. Spring and fall — already on the calendar.
